In the Capsule Series Slip Ring family of JINPAT,there are three categories based on the different diameters. The first categoryis the LPC series slip rings with a diameter of over 20mm. The second categoryis the LPM micro-series slip rings with a diameter between 10mm to 20mm. Thethird category is the LPMS series super miniature slip rings,with a diameter below 10mm after the large iteration of the Capsule Series SlipRings by JINPAT. Of course, these values are only for the standard slip ringsof this series of products. Due to the many customization options available forLPMS super miniature slip rings, more internal space isneeded to accommodate more wires, which makes the diameter of these customized products much larger than the standard ones.

Generally speaking, customized slip ringsof JINPAT using standard product molds and those developed through new moldscan be split evenly. This rule is especially applicable to the Capsule SeriesSlip Rings, and the latest super miniature custom slip ring LPMS-15-1501 from JINPATis a newly developed product. Because this slip ring is extremely small, itsfunction is also relatively simple, with only 15 1A current paths, and based onthe characteristics of a weak current slip ring, it also supports some commonsignal transmission. The unique feature of this product is that it does not havea plastic or stainless steel casing, but only a special high-temperature paperwrapping. This type of product is generally called a capsule slip ring abroad.

In addition to these newly developedcustomized products, the LPMS series of JINPAT also has a large number ofcustomized products that are improved based on standard models. The latestproduct representative is LPMS-12U-0801-E2, which twists the 4-path wires inthe standard product into a double twist, making them into a 100 Mbps Ethernetpath, while the remaining paths remain unchanged. Similar to this product isLPMS-12U-0701-U2, which retains only 7 1A current paths in the standard productas the USB 2.0 signal needs to occupy 5 rings.

The most classic super miniature customizedslip rings of JINPAT are still the LPMS-44S, LPMS-60S, and LPMS-80S, which arecommonly used slip rings in small rotating table electronic systems. Due to thelarge number of paths, their diameters are all around 15mm. Recently, JINPATmade a small improvement to the LPMS-44S slip ring by adding a flange to makeit easier to install, without changing its electrical and mechanicalparameters.