Description:
A pneumatic slip ring is a mechanism used to transfer fluid (under pressure or vacuum) from a stationary inlet to a rotating outlet, preserving and isolating the fluid connection.
Pneumatic slip rings are engineered to endure a wide range of temperatures and pressures for a variety of conditions and environments. In addition, rotary unions may integrate multiple passages and handle different types of fluid simultaneously.
Rotary Unions & Joints Spec | Specifications | ||||
Max.operating Pressure | 6bar | Fiber types | SM:9/125um | Storage temperature | -55~+85°C |
Medium Type | Air | Channel number | 1 | Maximum speed | 10rpm |
Passages(Gas/Flow) | 2 in 2out | Wavelengthrange | SM:1270-1650nm | Package style | Pigtails on both ends |
Insertion loss | <2dB | Weight,approx | 10g(No tail cable and connection included ) | ||
Outer diameter of tube | φ12mm | Insertion lossripple | <0.5dB | Jacket types | 3mm(TPU) |
Return loss | ≥40dB(SM) | Connector types | SC/PC | ||
No-load torque | ≤8.0N.m | Max Optical Power | 23dBm | IP rating | IP40 |
Working temperature | :-45~+80°C |
Electrical&Electronics | Mechanical | |||
Circuits | total | 93CKT | Working Speed | 0~10 rpm |
Detail | 12x10A/9x5A8xGMS GND/49S/1 Group*100Mbit Ethernet | Inner Diameter | / | |
Rating Voltage | 220VAC(P)/24VDC(S) | Contact Material | Precious Metal | |
Dielectric Stength | 500VAC@50Hz(P) | Housing Material | Aluminum Alloy | |
Insulation Resistance | ≥500MΩ@500VDC(P) | Lead Wire Length | Stator:2000mm Rotor:2000mm | |
Environment | Remarks | |||
Working Temperature | -20°C~+60°C | Application | / | |
Working Humidity | ≤60%RH | Other | / | |
IP | IP40(Horizontal installation) | Note:"P"stands for power ,"S"stands for signal |
LPPL000-02A-1210-0905-57S-E2-FO01-EN-Outline Drawing
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.