Hydraulic Slip Ring for Automation Machinery
Hydraulic Slip Ring for Automation Machinery - LPT000-3205-048S-16QA
Integrated Slip Ring integrated with gas-liquid electric has three structures to choose from.
The first type is that the gas-liquid module uses one main shaft each, and the two are connected by bolts,
which is also the most common type of all gas-liquid electric integrated slip rings.
The second type is that the gasliquid module and the electric slip ring module share one main shaft, which is suitable for
gas-liquid integrated slip rings with fewer gas-liquid module channels.
The third type is a double-layer structure slip ring, The gas-liquid module is located at the center or outside of the slip ring,
which has high flexibility.
When the gas-liquid module is in the outer layer, the number of gas-liquid module channels supports multiple choices.
| Electronic & Electric | Mechanical | |||
| Circuits | Total | 48 CKT | Working Speed | 0~10rpm |
| Detail | 16*（2*1A+shield） | Contact Material | Gold to Gold | |
| Rating Voltage | 0~24V | Housing Material | Aluminum Alloy | |
| Dielectric Strength | ≥500VAC@50Hz(Power ） ≥100VAC@50Hz（signal) | Lead Wire Length | Stator:6000mm Rotor:13000mm | |
| Insulation Resistance | ≥100MΩ@500VDC(Power) ≥10MΩ@100VDC（signal) | Rotay Unions &Joints Spec | ||
| Environmental | Passages | 1~16 | ||
| Working Temperature | -20°C~+60°C | Joint thread | G1/8” | |
| Trachea size | Ф4-Ф8 | |||
| Working Humidity | ≤60%RH | Orifice flow | Ф5.5 | |
| Medium Type | Air | |||
| IP | IP40 | Max.Operating Pressure | 10 bar | |
For more details of this slip ring product, please contact JINPAT.
We will bring you a satisfactory custom solution!
Name
Email*
*Phone
Message
*
total 0 Sheet，Only 5 images can be uploaded, each less than 5m.