Through Bore Slip Ring With 20-50 Amps Circuits
Slip rings enable the transfer of electric power or signal across a rotating part, such as those
found in radar antennae, gun turrets, periscopes, electro-optic sensor gimbals and space satellites. The
sliding contact is established by a brush that presses against a metal ring. The “brush” looks like a
brush made from metal fibers, but more often it looks like a single wire or a spring with a pad of material
affixed to the end that contacts the ring. This LPT060 slip ring with through bore size 60 mm, it can
combine with power,signal,Ethernet,USB,Control Net,CANBUS, PROFIBUS, It could also be mounted by
shaft or optional flange mounting.
60 mm through-bore.
Compact 135mm outside diameter.
Modular design - a single module can have: one 50 amps ring; two 30 amps rings; one, two or three 10 amps rings or six
5 amps signals.
Up to 20-50 amps circuits.
Speed up to 500 rpm continuous.
Steel bearings and machined shaft and housing for harsh environment.
Collar mounting is standard; flange mounting is optional.
Various lead exits are available.
Silver plated rings are standard. Gold plated optional.
Continuous 360° rotation of power or data signals
Transfers control and data signals.
Fiber brush technology provides maintenance-free operation (no lubrication required).
Modular design meets special requirements through off-the-shelf manufacturing techniques.
Customized configurations for your application.
60%RH or higher
380VAC/DC or higher
≥1000V@50Hz between each circuit
Lead Wire Size
Lead Wire Length
≤9.25 g·m (for reference )
IP54 or higher