LPC-36T Slip Ring Capsules
A slip ring capsule can be used in any electromechanical system that requires unrestrained, intermittent,
or continuous rotation while transferring power and / or data. It can improve electromechanical
capability, simplify system design, eliminate possible damage while rotation.
The LPC-36T provides an economical, reliably available solution when a compact, high circuit count
configuration is required. Our standard LPC-36T offer 36, 2 amp signal rings, respectively. This design
features a low torque design with gold-on-gold contacts and low electrical noise. color-coded lead wires
suitable for transferring analog and digital signals.
Features
◆ 36 circuits models
◆ 1.5~6mm through hoe size
◆ 2 amps ,240VAC/DC per circuit.
◆ Speeds up to 200 rpm continuous
◆ Gold-Gold contacts
◆ Compatible with data bus protocols
◆ Sealed units are also available
◆ Flexible, color-coded, silver-plated, insulated lead wires
◆ Also available with 5 and 10 amps power rings combined with 2 amps rings.
◆ Precision ball bearings meet or exceed life requirements for most commercial applications
Advantages
◆ Low torque minimize system torque budget
◆ Tight packaging to fit in the most demanding space.
◆ Smooth running
◆ Low electrical noise
◆ Quick shipment as per your urgent requirement
◆ 360°continuous rotation
◆ High protection
Specifications | |
Operating Speed | 0-200 rpm |
Number of Circuits | 36 |
Voltage | 240 VAC/DC |
Current Rating | 2 amps per circuit |
Temperature Range | -20℃ to +60℃ |
Contact Material | Gold to Gold |
Lead Size | 28# silver plated copper |
Lead Lengths | Standard 250 mm (9.843inch) |
Hole Diameter | 1.5~6mm |
Dielectric Strength | ≥500 VAC @50Hz, between each circuit |
Insulation Resistance | 100 MΩ @ 500 VDC |
Electronic Noise | ≤35mΩ |