LPC-36A Capsule Slip Ring with 36 circuits
This unit can be used in any electromechanical system that requires unrestrained, continuous rotation
while transferring power or data from a stationary to a rotating structure. It is also called a rotary electricalinterface, commutator, collector, swivel or an electrical rotary joint. The LPC-36A capsule slip ring is a
standard, off-the-shelf unit that uses gold contacts at the rotary interface. Color coded lead wires are
used on both the stator and rotor for simplifying electrical connections.
Using a 90° V-groove ring design for each ring, the LPC 36A provides smoother running, lower torque
and lower electrical noise than competitive slip rings. It is available in 6, 12, 18, 24, 36 circuit models.
Features
◆ 36 circuits models
◆ 2 amps per circuit ,240VAC/DC
◆ Speed up to 300 rpm continuous
◆ Gold-Gold contacts
◆ Compatible with data bus protocols
◆ Sealed units are available
◆ Flexible, color-coded, silver-plated, lead wires
◆ Transfers analog and digital signals
◆ Also available with 5 and 10 amps power rings combined with 2 amps rings.
◆ Precision ball bearings meet or exceed life requirements for most commercial
applications
Advantage
◆ Low torque minimizes system torque budget
◆ Compact design to fit in the most demanding space.
◆ Smooth running
◆ Low electrical noise
◆ Quick shipment per your urgent requirement
◆ 360°continuous rotation
◆ High bandwidth transfer capability
◆ Rapid shipment
Specifications | |
Operating Speed | 0-300 rpm |
Number of Circuits | 36 |
Voltage | 240 VAC/DC |
Current Rating | 2 amps per circuit |
Temperature Range | -20℃ to +60℃ |
Contact Material | Gold to Gold |
Lead Size | 28# silver plated copper |
Lead Length | Standard 250 mm (9.843inch) |
Dielectric Strength | ≥500 VAC @50Hz, between each circuit |
Insulation Resistance | 100 MΩ @ 500 VDC |
Electrical Noise | ≤35mΩ |