LPC-24S Capsule Slip Ring
Description
This unit can be used in any electromechanical system that requires unrestrained, continuous rotation while transferring power or data from a stationary to a rotating structure. It is also called a rotary electrical interface, commutator, collector, swivel or an electrical rotary joint.
The LPC-24S slip ring capsule is a standard, off-the-shelf unit that uses gold contacts at the rotary interface. Color-coded lead wires are used on both the stator and rotor for simplifying electrical connections.
Using a 90° V-groove ring design for each ring, the LPC-24S provides smoother running, lower torque and lower electrical noise than competitive slip rings.
Features
◆ 2 amps per circuit ,240VAC/DC
◆ Gold-Gold contacts
◆ Compatible with data bus protocols
◆ Sealed units are available
◆ Flexible, color-coded, silver-plated, lead wires
◆ Transfers analog and digital signals
◆ Mounting flange on the housing
Advantage
◆ Low torque minimize system torque budget
◆ Tight packaging to fit in the most demanding space.
◆ Smooth running
◆ Low electrical noise
◆ Quick shipment per your urgent requirement
◆ 360°continuous rotation
◆ High bandwidth transfer capability
◆ Addition of special components
◆ Working speed would be up to 300rpm or higher
◆ Transfer analoge and digital signals
Specifications | |
Number of circuits | 24 |
Working speed | 0~300rpm |
Working temperature | -20℃~ +60℃ |
Working humidity | 60% or higher |
Raw material | ROHS comply |
Voltage rating | 240VAC/DC |
Current rating | 2A each circuit |
Dielectric strength | ≥500V@50Hz between each circuit |
Insulation resistance | 100MΩ@ 500VDC |
Electrical noise | ≤35mΩ |
Contact material | Gold to Gold |
Lead wire size | AWG30# Teflon UL, coaxial cable, video cable, and Ethernet cable |
Lead wire length | Rotor: 250mm; Stator: 250mm |
Housing material | Aluminum alloy |
Torque | ≤0.88 g·m (for reference) |
Protection | IP54 |