LPC-18E Capsule Slip Ring
This unit can be used in any electromechanical system that requires unrestrained, continuous rotation while transferring power or data from a stationary to a rotating structure. It is also called a rotary electrical interface, commutator, collector, swivel or an electrical rotary joint.
The LPC-18E capsule slip ring is a standard, off-the-shelf unit that uses gold contacts at the rotary interface. Color-coded lead wires are used on both the stator and rotor for simplifying electrical connections.
Using a 90° V-groove ring design for each ring, the LPC-18E provides smoother running, lower torque and lower electrical noise than competitive slip rings. It is available in 6, 12, 18 circuit models.
◆ 18 circuits models
◆ 2 amps per circuit ,240VAC/DC
◆ Speed up to 300 rpm continuous
◆ Gold-gold contacts
◆ Compatible with data bus protocols
◆ Sealed units are also available
◆ Flexible, color-coded, silver-plated, insulated lead wires
◆ Transfer analog and digital signals
◆ Also available with 5 and 10 amps power rings combined with 2 amps rings.
◆ Precision ball bearings meet or exceed life requirements for most commercial applications
◆ Low torque minimize system torque budget
◆ Compact design to fit in the most demanding space.
◆ Smooth running
◆ Low electrical noise
◆ Quick shipment per your urgent requirement
◆ 360°continuous rotation
◆ High bandwidth transfer capability
◆ Addition of special components
◆ Quick shipment
|Operating Speed||0-300 rpm|
|Number of Circuits||18|
|Current Rating||2 amps per circuit|
|Temperature Range||-20℃ to +60℃|
|Contact Material||Gold to Gold|
|Lead Size||28# silver plated copper|
|Lead Length||Standard 250 mm (9.843inch)|
|Dielectric Strength||≥500 VAC @50Hz, between each circuit|
|Insulation Resistance||100 MΩ @ 500 VDC|
|Electrical Noise||1mΩ Min|