LPC-12T-A Capsule Slip Ring
Description
This unit can be used in any electromechanical system that requires unrestrained, continuous rotation while transferring power or data from a stationary to a rotating structure. It is also called a rotary electrical interface, commutator, collector, swivel or an electrical rotary joint.
The LPC-12T-A capsule slip ring is a standard, off-the shelf unit that uses gold contacts at the rotary interface. Color-coded lead wires are used on both the stator and rotor for simplifying electrical
connections. Using a 90° V-groove ring design for each ring, the LPC-12T-A provides smoother running, lower torque and lower electrical noise than competitive slip rings.
Features
◆ 12 circuits models
◆ 2 amps ,240VAC/DC per circuit
◆ Speed up to 50 rpm continuous
◆ 6.4 mm through hole size
◆ Compatible with data bus protocols
◆ Sealed units are also available
◆ Flexible, color-coded, silver-plated, insulated lead wires
◆ Precious metals contacts
◆ Precision ball bearings meet or exceed life requirements for most commercial applications
Advantage
◆ Low torque minimizes system torque budget
◆ Compact design to fit in the most demanding space
◆ Smooth running
◆ Low electrical noise
◆ Quick shipment as per your urgent requirement
◆ 360°continuous rotation
◆ High protection
Specifications | |
Operating Speed | 0-300 rpm |
Number of Circuits | 12 |
Voltage | 240 VAC/DC |
Current Rating | 2 amps per circuit |
Temperature Range | -20℃ to +60℃ |
Contact Material | Precious metals |
Housing Material | Aluminum alloy |
Lead Size | 28# silver plated copper Teflon® UL |
Lead Length | Standard 250 mm (9.843inch) |
Hole Diameter | 6.4 mm |
Dielectric Strength | ≥500 VAC @50Hz, between each circuit |
Insulation Resistance | 100 MΩ @ 500 VDC |
Electrical Noise | ≤35mΩ Min |
IP Class | IP54 |