LPC-125B Capsule Slip Ring
Description
This unit can be used in any electromechanical system that requires unrestrained, continuous rotation
while transferring power or data from a stationary to a rotating structure. It is also called a rotary
electrical interface, commutator, collector, swivel or an electrical rotary joint.
The LPC-125B capsule slip ring is a standard and off-the-shelf unit that uses gold contacts on the rotary interface. Color-coded lead wires are used on both the stator and rotor for simplifying electrical connections.
Using a 90° V-groove ring design for each ring, the LPC-125B provides smoother running, lower torque and lower electrical noise than competitive slip rings.
Features
◆ 2 amps per circuit ,240VAC/DC
◆ Speed up to 300 rpm continuous
◆ Gold-gold contacts
◆ Compatible with data bus protocols
◆ Sealed units are available
◆ Flexible, color-coded, silver-plated, lead wires
◆ Transfers analog and digital signals
◆ Mounting flange on the housing
Advantage
◆ Low torque minimize system torque budget
◆ Compact package.
◆ Smooth running
◆ Low electrical noise
◆ Quick shipment per your urgent requirement
◆ 360°continuous rotation
◆ High bandwidth transfer capability
◆ Addition of special components
◆ Working speed would be up to 300rpm or higher
◆ Transfer analoge and digital signals
Specification | |
Number of Circuits | 125 circuits |
Working Speed | 0-300rpm |
Working Temperature | -20℃~ +60℃ |
Working Humidity | 60%RH or lower |
Current Rating | 2A each circuit |
Voltage Rating | 240VAC/DC |
Dielectric Strength | ≥500V@50Hz |
Insulation Resistance | 100MΩ@ 500VDC |
Electrical Noise | ≤35mΩ |
Contact Material | Gold to Gold |
Wire Side | AWG#28 silver plating Teflon UL |
Wire Length | 250mm for rotor/stator (standard) |
Housing Material | Metal |
Protection Grade | IP40 |