Description:
This slip ring can be used in any electromechanical system that requires unrestrained, continuous rotation while transferring power or data from a stationary to a rotating structure. It is also called rotary electrical interface, commutator, collector, swivel or electrical rotary joint.
The LPC-06A capsule slip ring is a standard and off-the-shelf unit that uses gold contacts on the rotary interface. Color-coded lead wires are used on both the stator and rotor for simplifying electrical connections.
Using a 90° V-groove ring design for each ring, the LPC-06A provides smoother running, lower torque and lower electrical noise than similar slip rings. It is available in 6, 12, 18, 24, 36 to 125 circuit models.
Features
◆ 2 amps per circuit , 240 VAC/VDC
◆ Gold-Gold contacts ensure long life time
◆ Compatible with data bus protocols
◆ Sealed units are available
◆ Flexible, color-coded, silver-plated lead wires
◆ Transferring analog and digital signals
◆ Structural flange on the housing
◆ Also available at 5A and 10A power rings combined with 2 amps rings.
Advantages
◆ Low torque minimizes system torque budget
◆ Compact package.
◆ Smooth running
◆ Low electrical noise
◆ Prompt shipment per your urgent requirement
◆ 360°continuous rotation
◆ High bandwidth transfer capability
◆ Addition of special components
◆ Working speed would be up to 300rpm or higher
◆ Transfer analoge and digital signals
Specifications | |
Operating Speed | 0-300 rpm |
Number of Circuits | 1-6 |
Voltage | 240 V AC/DC |
Current Rating | 2 amps /per circuit |
Temperature Range | -20℃to+60℃ |
Contact Material | Gold to Gold |
Lead Size | AWG28, silver plated copper UL , Teflon® |
Lead Lengths | Standard 250 mm (9.843inch) |
Dielectric Strength | 500 VAC @50Hz, between each circuit |
Insulation Resistance | 100 MΩ@ 500 VDC |
Electric Noise | ≤35mΩ |