home >> Miniature Slip Rings >> LPM-18C

LPM-18C Miniature Slip Ring

 Slip rings can be designed in a variety of configurations. For example they can provide an open through-bore to accommodate other components such as a fluid joint or a wave guide. Instead of a drum the rings can be configured in a platter or pancake. This is appropriate if the space available for the slip ring is short and wide instead of tall and narrow.
The gold-gold technology used between rings and brushes, minimise noise and interferences between the rings, allowing high data rate and frequency signal transmission. The LPC-18D provides smoother running, lower torque and lower electrical noise than competitive slip rings. It is available in 4, 6, 12, 18 circuit models.


◆ 18 circuits models
◆ 2 amps per circuit , 240 VAC/DC
◆ Precision assembly to provide exceptional rotational life
◆ Speeds up to 300 rpm continuous
◆ Gold-Gold contacts
◆ Flexible, color-coded, silver-plated, Teflon®
 UL lead wires
◆ Superior handling of low level control signals
◆ Metal housing optional


◆ Low torque minimizes system torque budget
◆ Compact design to fit in the most demanding space.
◆ Smooth running
◆ Low electrical noise
◆ Quick shipment per your urgent requirement
◆ 360°continuous rotation
◆ Addition of special components


  Operating Speed

0-300 rpm

  Number of Circuits



240 VAC/DC

  Current Rating

2 ampsper circuit

  Temperature Range

-20℃to +60℃

  Contact Material

Gold to Gold

  Lead Size

30# silver plated copper Teflon® UL

  Lead Length

Standard 250 mm(9.843inch)

Dielectric Strength

≥500 VAC @50Hz, between each circuit

Insulation Resistance

1000 MΩ@ 500 VDC

  Electrical Noise




Capsule Length =L

# of Circuits

L (mm)

Part No






Contact us on wire color codes !