home >> Separate Slip Rings >> LPS-03

LPS-03 Separate Slip Ring with Low torque

Sometimes a self-contained “capsule” slip ring is not practical due to system size constraints or cost limitations. We can provide the slip ring (rotor) and brush block (stator) as separate components to be mated by the customer in their system. it can be used for routing hydraulic lines and pneumatic lines.

A slip ring can be used in any electromechanical system that requires unrestrained, intermittent or continuous rotation while transmitting power and / or data. It can improve mechanical performance, simplify system operation and eliminate damage-prone wires dangling from movable joints.


◆ 3 circuits models
◆ Speed up to 300 rpm continuous
◆ Gold-Gold contacts
◆ 250mm standard lead lengths
◆ Compatible with data bus protocols
◆ Sealed units are available
◆ Flexible, color-coded, silver-plated, Teflon® UL lead wires
◆ Precision ball bearings meet or exceed life requirements for most
commercial applications


◆ Low torque minimizes system torque budget
◆ Compact design to fit in the most demanding space.
◆ Smooth running
◆ Low electrical noise
◆ Quick shipment per your urgent requirement
◆ 360°continuous rotation
◆ High bandwidth transfer capability


  Operating Speed

0-100 rpm

  Number of Circuits



240 VAC/DC

  Current Rating


  Temperature Range

-20℃ to +60℃

  Working Humidity

60%RH or higher

  Contact Material

Gold to Gold

  Lead Size

32 # silver plated copper Teflon® UL

  Lead Length

Standard 250 mm (9.843inch)

Dielectric Strength

≥500 VAC @50Hz, between each circuit

  Insulation Resistance

1000 MΩ @ 500 VDC

  Electrical Noise

1 mΩMin

The operating life of the unit depends upon temperature, rotation speed and environment.
The operating life ≥50,000,000 runs ref.

Separate Slip Ring

# of Circuits

OD (mm)

Part No





Contact us on wire color codes!